Welcome to my Lotus 7 Replica Blog

I intend to use this blog to show the various stages as I rebuild an old Lotus 7 replica from a bit of a mess to something respectable.


Along the way i'll detail the procedures required and hopefully inspire others to do similar.



Photobucket




Sunday, May 31, 2009

Wheels on

Finally got around to fitting the tyres onto the wheels.
A little filing was required to get them to fit well on the hubs.
Minilights are the only wheels worth fitting to a 7 especially in 13" size.
A big improvement over the old Hotwires!
 
 

Sunday, May 24, 2009

New centre console

I decided to tidy up the centre console as it looked quite terrible being a bit of a hash up of old aluminium and the terrible gaiter around the gear stick!
I got some stainless steel rings laser cut through work and some aluminium folded up by my friend Brett.
I used Steel Tek screws to fasten it all down, looks good in aluminium but will cover it in black vinyl at some stage once I get the seats retrimmed or replaced.....
 
 
 

Monday, May 11, 2009

Powdercoated Wheels

Had the wheels powdercoated a dark grey.
Managed to get them done for a box of beers due to a big job at work also being done at the same time.
They've come up well and you can't even spot the where the damage was!
Just have to get the tyres swapped over and put them on the car now!
Might have to make up some nice centre caps so I can put a logo on them!

Sunday, April 19, 2009

New Wheels

Picked up some cheap 13" Minilights off Trademe for $200.
13x6" front, 13x7" rears, 4x110 although you can make them fit a 108 no problem (a little bit of filing).
Perfect size and type, only problem was one of them was broken.
Aeromachinists in Te Rapa, Hamilton came to the rescue fixing it up for $100.
All I have to do now is get them powdercoated.

 
 

Wednesday, February 4, 2009

Exhaust Cover, Guard Protectors

Decided to get an exhaust cover rolled up by the same friend who did my bonnet.
Looks a lot better than just a bare pipe, but will still replace the whole system with a Stainless muffler.
Also made some aluminium stone protectors for the back arches.
 
 

Thursday, January 22, 2009

New Rings

Decided to put new rings in the 20v.
Quite easy to do really, drop the sump, loosen the rod bolts, take the head off and remove piston/rod.
Remove old rings, clean ring gaps, install new rings and reinstall.
On 20v's they have a tendency for the oil control rings to gunge up, this causes massive oil blow by and is a real pain.  I think it gets worse with infrequent use too.
Rings solved my problem! No more smoking!
 
 

Monday, January 12, 2009

New Shocks

Ordered a complete set of GAZ Coilovers due to the old Spax being completely shot and the rear end soggy as!
Cost approx. $1200 NZD delivered from the UK.
Dampertech was very helpful to deal with and it seems my chosen springs seem to work well.
Fronts: 250lb, Rears: 200lb.
Shocks are set quite soft, but give it a lot better handling.